月亮雨小组的天地 YLY Studio

惠普HPE ML110 G9 的换热插拔电源拆装说明

参考 HPE网站的文档

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c04630949  

说明显示拆普通的350w或550w电源:

To remove the component follow the steps given below:

  1. Power down the server

  2. Remove all power:

    • Disconnect each power cord from the power source.

    • Disconnect each power cord from the server.

  3. Place the server on a sturdy, level surface.

  4. Remove the access panel Click here to view how to remove the access panel .

  5. If installed, remove the PCI air baffle Click here to view how to remove the PCI air baffle .

  6. Remove the system air baffle Click here to view how to remove the system air baffle .

  7. Disconnect all power supply cables from the system board, drive cages, and devices

  8. Remove the existing power supply.


    image.png


HPE ML110 Gen9 redundant power supply enablement kit

image.png


先是有个固定的铁板

image.png


image.png

然后再安装热插拔电源笼的架子,固定在上面一个铁板上。

image.png


热插拔电源模式是HP 老的750W 型号512327-B21,最低50元就买得到, 比买550w的天价电源要好一些。

image.png


标签: HPE惠普

作者:mysy2001 分类:计算机硬件 浏览:128 评论:0
留言列表
发表评论
来宾的头像